Skip to main content

How to Set Up & Use Weedmaps Auto Print 2.0

Learn how to install, configure, and troubleshoot the Weedmaps Auto Print 2.0 desktop application to automatically print physical order receipts as soon as customers check out.

Written by Weedmaps Onboarding

Overview

Weedmaps Auto Print 2.0 is a desktop application that automatically routes incoming pickup and delivery orders from Weedmaps directly to your local receipt printer.

Key Features

  • Instant Order Fulfillment
    Automatically generates physical order receipts the moment a customer submits an order.
    ​

  • Hands-Free Operation
    Eliminates the need for dispensary staff to manually check screen notifications or click "Print" for every ticket.
    ​

  • Multi-Location Support
    Easily toggle between distribution centers or store locations directly inside the app.

Prerequisites & Hardware Compatibility

Before installing the software, ensure your hardware and network meet the following requirements:

  • Supported Printer
    Optimized for Star Micronics Receipt Printers (e.g., Star TSP100 series).
    ​

  • Shared Network
    The desktop computer running Auto Print 2.0 and the receipt printer must be connected to the exact same Wi-Fi or LAN network.
    ​

  • Printer Supplies
    Verify that the printer is powered on, loaded with thermal paper, and connected to your network or desktop device.

Step-by-Step Installation & Setup

1. Download & Install the Application

  1. Log in to Weedmaps Admin.
    ​

  2. Select Auto Print under the Orders dropdown.
    ​

  3. Download the official Weedmaps Auto Print 2.0 desktop installer file to your dispensary computer.
    ​
    ​


    ​

  4. Open the downloaded setup file and follow the on-screen prompts to complete the installation.
    ​

  5. Launch the WM Auto Print application

2. Log In & Select Location

  1. Enter your Weedmaps Admin email and password.
    ​

  2. From the location menu, select the distribution center or store location where you want to enable automatic printing.

3. Configure Your Default Printer

  1. Open the Settings menu within the Auto Print application.
    ​

  2. Locate the Printer Configuration section.
    ​

  3. Select your connected receipt printer (e.g., Star TSP100) from the device dropdown list.
    ​

  4. Save your printer settings.

Testing Auto Print Functionality

To confirm your configuration is working:

  1. Submit a test order on your Weedmaps listing.
    ​

  2. Verify that the order confirmation ticket automatically prints at your station without manual intervention.

Troubleshooting & Common Issues

Important: The Auto Print 2.0 desktop application must remain open and running in the background on your computer throughout business hours to continuously capture and print orders.


​Issue


​Cause

Solution

Location menu keeps spinning
​
(Screenshot below)

No user logged in or session expired

Ensure you are fully logged into the desktop application with valid Weedmaps Admin credentials.

Orders fail to print

Application is closed

Verify that the Auto Print application icon is active in your taskbar/system tray.

Printer not detected

Network mismatch

Confirm that both the desktop computer and the receipt printer are connected to the same Wi-Fi network.

Print jobs queueing/stuck

System glitch

Restart the Auto Print application. If issues persist, restart the desktop computer and check the printer cable/paper supply.


Need additional technical support with Auto Print 2.0?
​
Connect with our support team at [email protected] or your Weedmaps Representative.

Did this answer your question?